NEMIC-LAMBDA
PH100F24 SPECIFICATION
C101-01-01A MODEL ITEMS 1 Nominal Output Voltage 2 Maximum Output Current 3 Nominal Output Power 4 Efficiency (Typ.) 5 Input Voltage Range 6 Input Current (Typ.) 7 Output Voltage Accuracy 8 Output Voltage Range 9 Maximum Ripple & Noise 10 Maximum Line Regulation 11 Maximum Load Regulation 12 Over Current Protection 13 Over Voltage Protection 14 Remote Sensing 15 Remote ON/OFF Control 16 Parallel Operation 17 Series Operation 18 I.O.G. Signal 19 Operating Temperature 20 Operating Humidity 21 Storage Temperature 22 Storage Humidity 23 Cooling 24 Temperature Coefficient (%) 25 Withstand Voltage 26 Isolation Resistance 27 Vibration 28 Shock 29 Weight (Typ.) 30 Size (W x H x D) =NOTES= *1. At 24VDC and Maximum Output Current. *2. 18 ~ 36VDC, Constant Load. *3. No load ~ Full load, Constant input voltage. *4. Constant current limiting with automatic recovery. *5. Inverter shutdown method, Manual Reset. *6. Ratings - Refer to Derating Curve on the Right. - Load(%) is Percent of Maximum Output Current. *7. Heatsink has to be Chosen According to Instruction Manual. *8. Refer to Instruction Manual. *9 External Components are Needed for Operation. (Refer to Basical Connection and Instruction Manual) *10 At 24VDC Input.(Refer to Instruction Manual.) (*7) (*1) (*1) (*10) (*9) (*2) (*3) (*4) (*5) (*8) (*8) (*8) (*8) (*8) (*6) (*1) V A W % A mV mV mV A V mm 165% ~ 240% 100 20 40 20% 100 20 40 100 20 40 150 48 96 105% ~ 140% 125% ~ 145% Possible Possible (SHORT:ON OPEN:OFF) Possible Possible Possible (Open Collector Output) - 20C ~ + 85C (Base plate) Ambient Temperature MIN = - 20C. 30 - 95%RH (No Dewdrop) - 40C ~ + 85C 10 - 95%RH (No Dewdrop) Conduction Cooled 0.02% / C Input-Baseplate : 2kVAC, Input-Output : 2kVAC(20mA) for 1min Output-Baseplate : 500VDC(100mA) for 1min More than 100Mohm at 25C and 70%RH Output-Baseplate...500VDC At No Operating, 10-55Hz (Sweep for 1min) Amplitude 0.825mm Constant (Maximum 49.0m/s2) X,Y,Z 1h each 196.1m/s2 (In package) 180g 83 x 12.7 x 86 (Refer to Outline Drawing) 2.53 3.57 5.21 PH100F PH100F 24-2 2 20 40 66 24-3 3 20 60 70 PH100F 24-5 5 20 100 80 PH100F PH100F PH100F PH100F 24-12 12 8.4 100.8 81 18 ~ 36VDC 5.19 1% 5.11 +20%, -60% 150 60 120 240 96 192 280 112 224 5.06 5.06 24-15 15 6.7 100.5 82 24-24 24 4.2 100.8 83 24-48 28 3.6 100.8 83
*DERATING CURVE* 100 80 Load (%) 60 40 20 0 -20 0 20 40 60 80 100 85 Baseplate (C)
|
